To make your Roman Blind, YOU WILL NEED...

You can start with a Pretty Frills Roman Blind Kit and add any necessary accessories, or buy all the components separately. The following accessories are provided in each kit.

Fabric Requirements:

Purchase sufficient material to cover the width and drop required ADDING 6cms to the width for side hems and 10cms to the length for top and bottom hems. Allow for pattern matching if using more than one width of cloth.

Linings:

It is not essential, but it is recommended that Roman Blinds be lined. Purchase sufficient to cover the width and drop required, ADDING an extra 60cms for every metre of the drop. (This extra lining will be needed to make up pockets for the blind bars and for the top and bottom hems).

These components can also be purchased separately, if preferred:

• Touch and Close Fastener

• Clear Rings - 11mm diameter
• Porcelain Cord Guides or Screw Eyes
• Cord Connector on 2.2mm cord with Acorn
• Wall cleat with screws and wall plugs
• Roman Blind UPVC bars
• Roman Blind Bottom Bar
• Wooden Batten or UPVC Headrail - battens 1 ¼" X ¾" (3x2cm), or UPVC 1" square.The 20mm adhesive backed mushroom hook is to be attached to the batten or the headrail. For a more professional finish Sidewinder headrails are now available.